Ceramic Tool Company
Sally: 262-951-4203
Christina: 262-522-6300
April: 262-522-6332
Peggy: 262-522-6334
CTC SQ
The CTC "SQ" is an anodized aluminum profile that is designed primarily to finish the edge of wall tile at a corner, but can also be used in hard surface floor applications.
SQ
SQ - 1/2" reveal
APPLICATIONS
- Used in commercial or residential wall applications needing a finished corner.
- Can be used as a design element in a tiled floor or wall pattern.
- CTC 12 SQ would also work as a stair nosing, preventing chipping of tile on the riser or top tread.
- Can be installed to meet the lip edge, or under for additional edge protection.
EASY INSTALLATION
FIVE FINISHES TO CHOOSE FROM
- Select Color for Larger View
- Anodized Aluminum (clear)
- Light Bronze
- Medium Bronze
- Dark Bronze
- Black
- Anodized Explanation (pdf)
| CTC SQ | |
| Tile Thickness | Product Code |
| 1/2" - 12mm | CTC 12 SQ |
- CTC 12 SQ is sold in 94" lengths
CTC SQ Wall Profile
ADDITIONAL INFORMATION
OTHER HARD SURFACE PROFILES
SOLUTIONS WITH METAL TRIMS
High Quality Metal Trims and Pre-Molded Expansion Joints for all your Flooring Needs
HOW TO RADIUS:
CTC Trims and Transitions can easily be modified and installed in a radius or curve using the following directions as a guide.
Using a tin snips or other appropriate tool, cut the notches out of perforations in leg. The number of open holes required is dependent on the size of the radius. The more perforations that are cut the more bendable the product becomes. (If bending the CTC Joint, you will need to cut the leg on both sides.)
Then slowly bend the CTC Trim into the desired arc. CTC Transitions can be shaped for inside or outside radiuses.
We strongly suggest the use of a template to pre-shape transitions strips prior to installation. This will prevent "kinking" of materials. A template can be created out of any sturdy sheet material such as plywood or masonite.
CTC 12 SQ SPECIFICATIONS:
METAL EDGE STRIPS
Provide anodized aluminum square edge strip with 1/2" reveal at both top edge as well as perpendicular edge with integral provision for anchorage to mortar bed or substrate. Height to match tile, stone or wood thickness. Finish to be determined by architect.
Manufacturer - Ceramic Tool Company
800-236-5230 - Fax 262-513-9332
PRODUCT WARRANTY:
Ceramic Tool Company (CTC) warrants our products to be of good quality and manufactured to meet ANSI standards.
Satisfactory results depend not only upon the quality of our products but also on many factors beyond our control.
The user shall rely on his own information and tests to determine suitability of the product for the intended use and the user assumes all risk and liability resulting from his use of this product.
CTC's sole liability is to replace the product or refund the purchase price if the product is determined to be defective.
All CTC trims are made in the USA.
CTC MISSION STATEMENT:
Here at Ceramic Tool Company, it is our responsibility to provide all our customers with the best flooring products at a great price. More than that, we know beyond our inventory we have the experience of 30 years helping you get the exact material you need, exactly when you need it.
When you call Ceramic Tool, our goal is to understand just what your application is, so even if the plans don't call out for our product, we make sure the right one gets installed. We want to find the best way to help you, from finding the perfect flooring trim to getting it shipped to you or the jobsite right on time.